Universal Socket Weld Style - US

Member of the Housed Series

Click To Enlarge

×

Universal Socket Weld Style - US

The Universal Socket Weld (US) check valve is a one piece body machined from bar stock with socket weld ends and designed for a minimum pressure drop.  It carries rugged, dependable Check-All trim and there are a wide variety of seat materials and cracking pressures to choose from.  This valve series is particularly attractive when weld joints are required. The socket ends are machined to ASME/ANSI B16.11 dimensions.
Note: Please take precautionary measures when welding to prevent heat build-up and possible damage to the valve seat.

(View Similar Products)

NOTES (DIMENSIONS TABLE)
*May be larger.
**Sockets per ASME/ANSI B16.11.
Consult factory for more information.

View US Dimensions in PDF format

Nominal Size Size Code A B* C** D** Orifice Diameter
3/8 C 2.16 1-1/8 0.695 0.385 0.348
1/2 D 2.71 1-5/16 0.860 0.385 0.464
3/4 F 2.95 1-5/8 1.070 0.505 0.593
1 H 3.64 2-1/4 1.335 0.505 0.890
1-1/4 I 3.91 2-3/4 1.680 0.505 1.135
1-1/2 J 4.36 3-1/4 1.920 0.505 1.385
2 K 5.85 3-1/2 2.411 0.625 1.555
2-1/2 L 5.00 3-3/4 2.919 0.625 1.555
3 M 5.44 4-1/2 3.545 0.625 2.025
4 N 6.80 5-1/2 4.550 0.755 2.560
  • 316/316L Stainless Steel (SS)
  • Alloy B (HB)
  • Alloy 20 (A2)
  • Alloy C-276 (HC)
  • Carbon Steel (CS)
  • Alloy 400 or MONEL® (MO)
  • Body Material Availability Non-Shock Pressure-Temperature Rating
    316/316L Stainless Steel (SS) Standard
    3/8" - 2-1/2"
    5000 PSIG @ 100°F
    (1500 PSIG for o-ring seats)
    3"
    3000 PSIG @ 100°F
    (1500 PSIG for o-ring seats)
    4"
    1500 PSIG @ 100°F
    Carbon Steel (CS)
    Alloy 20 (A2) Semi-standard
    Alloy C-276 (HC)
    Alloy 400 or MONEL® (MO)
    Alloy B (HB) Contact the factory for these or other materials.

    Seat material and spring material selection may limit the recommended service temperature.
    See seat ratings, spring ratings, and body material ratings for their respective recommended service temperatures.
    Consult the factory for reduced P-T rating above 100 °F. Standard spring material is 316 Stainless Steel.

    Size Cv
    3/8 1.9
    1/2 4.3
    3/4 7.2
    1 11.0
    1-1/4 19.0
    1-1/2 31.9
    2 42.0
    2-1/2 50.0
    3 89.0
    4 140

    P
    R
    E
    S
    S
    U
    R
    E

    D
    R
    O
    P

    P
    S
    I

    FOR WATER AT 72°F

    WATER FLOWRATE - GPM

    Note: All flow curves and Cv values presume the valves are fully open with 1/2 PSI cracking pressure springs. Consult the factory for more information.

    SIZE PART NUMBER SS, CS & Alloys
    3/8 USC 5.1 oz.
    1/2 USD 11.5 oz.
    3/4 USF 1.2 lb.
    1 USH 3.1 lb.
    1-1/4 USI 4.9 lb.
    1-1/2 USJ 7.4 lb.
    2 USK 9.8 lb.
    2-1/2 USL 8.8 lb.
    3 USM 13 lb.
    4 USN 22.3 lb.
    Valve weights are approximate.
    Valve Style Size Range Body Materials Other Options Allowable Seat Materials Other Options Standard Cracking Pressures Other Options More Info. Standard Spring Material More Info.
    US 3/8" - 1-1/4" 316L SS
    AFLAS®
    EPDM
    "Metal to Metal"
    PTFE
    Buna-N
    Kalrez®
    Neoprene
    Viton®
    1/8 PSI
    1/2 PSI
    1.5 PSI
    3.5 PSI
    316 SS
    US 3/8" - 1-1/4" C. Steel AFLAS®
    Buna-N
    Kalrez®
    "Metal to Metal"
    Neoprene
    PTFE
    Viton®

    1/8 PSI
    1/2 PSI
    1.5 PSI
    3.5 PSI
    316 SS
    US 1-1/2" - 2" 316L SS
    AFLAS®
    Buna-N
    EPDM
    Kalrez®
    "Metal to Metal"
    Neoprene
    PTFE
    Viton® 
    1/8 PSI
    1/2 PSI
    1.5 PSI
    316 SS
    US 1-1/2" - 2" C. Steel AFLAS®
    Buna-N
    Kalrez®
    "Metal to Metal"
    Neoprene
    PTFE
    Viton®
    1/8 PSI
    1/2 PSI
    1.5 PSI
    316 SS
    US 3/8" - 2" Alloy 20
    Alloy C-276
    AFLAS®
    Buna-N
    EPDM
    Kalrez®
    "Metal to Metal"
    Neoprene
    PTFE
    Viton®
    1/2 PSI Alloy C-276
    US 3/8" - 2" Alloy 400 or MONEL® AFLAS®
    Buna-N
    EPDM
    Kalrez®
    "Metal to Metal"
    Neoprene
    PTFE
    Viton®
    1/2 PSI Alloy 400 or MONEL®
    US 3/8" - 2" Alloy B AFLAS®
    Buna-N
    EPDM
    Kalrez®
    "Metal to Metal"
    Neoprene
    PTFE
    Viton® 
    1/2 PSI Alloy B

    About UsTrademarksPrivacy PolicyTerms of UseContact Us

    ©2016 Check-All Valve Mfg., Co. All Rights Reserved