|
 
|
Style FIV (F1, F6, FP)
The Flange Insert Valve can be
installed in any ANSI class 150, 300, or 600 flanged connection in the system,
horizontally or vertically with no alterations to existing pipe necessary.
Simply spread a flanged joint, insert the valve, and tighten the bolts. View
More
|
|
|
|
|
Style
LPI (LP)
The
Lined Pipe Insert check valve is designed to fit between two flanges on most
lined pipe systems. No gaskets are required, just spread the flanges, center the
valve, and bolt the flanges. View
More
|
|
|
|
|
Style SCV (SC)
The
Sanitary Cartridge Valve is a 316 stainless steel check valve for use in new or
existing sanitary systems. The SCV design seals on the ID of sanitary
ferrules with replaceable food grade seals.
View More
|
|
|
|
|
Style
3SC (3S)
The 3-A Sanitary
Check Valve is an all 316/316L stainless steel check valve for use in
new or existing sanitary systems. The
compact 3SC design fits inside a single set of ferrules with 3-A specified materials
(standard is EPDM), and requires no additional space in the line.
The valve is designed to be easily disassembled and spare parts are available.
View More
|
|
|
|
|
Style
SIV (CB, TC)
The
Sanitary Insert Valve is an all fluoropolymer (PTFE/FEP/PFA), check valve with a 316 stainless steel spring (which can be FEP encapsulated) for use in new or existing sanitary systems.
The valve is designed to fit into grooved end clamp type fittings and
replaces the gasket normally used with these fittings.
View More
|
|
|
|
|
Style
UIV (UV)
The
Union Insert Valve is designed to be inserted into most
ground joint unions. It provides the most simple and economical way to install a
check valve into a system. View
More
|
|
|
|
|
Style
SSI (SI)
The Straight
Sided Insert valve is a thread-less check valve designed for use in any cavity
where a check valve is needed and threads are not desired. View More
|
|
|
|
|
Style
GPI (GP)
The
Glass Pipe Insert check valve an all fluoropolymer (PTFE/FEP/PFA) check valve
with a FEP encapsulated spring.
This check valve is used in systems that utilize glass pipe and installs
between connecting flanges where a gasket would normally be located. View More
|
|
|
Styles
UN-3 (U3) and UN-10 (U1)
The
Universal Low (to 3,000 psig) and High (to 10,000 psig) pressure check valves
have a single piece body construction machined from bar stock. These
economical valves are designed for maximum flow with minimum pressure drop.
View More UN-3
or View More UN-10.
|
|
|
|
|
Styles
UN-SW (US)
The
Universal Socket Weld check valve is designed for use in applications where weld joints are required. The housed designe of the UN-SW allows for minimum pressure drop when a light spring setting is used.
View More
|
|
|
|
|
Style
CON (CN)
The
Connector check valve is designed for use in applications where male pipe
threads are required. The hex nipple or connector housing design allows for ease in
installation either as a check valve, vacuum breaker or low-pressure relief
valve. View More
|
|
|
|
|
Style
BU (BU)
The
Bushing check valve is compactly housed in a common reducing coupling. Its
size makes it convenient for use as a vacuum breaker or low-pressure relief
valve. View More
|
|
|
|
|
Style
HVFD (HV)
The
Horizontal/Vertical Flanged and Drilled Valve is a one-piece cast body valve
with ANSI/ASME B16.5 Class 150 flanged ends. It is available in ANSI 150 only. These
valves are designed for use with mating ANSI class 150 flanges for maximum flow with minimum pressure drop.
View More
|
|
|
|
|
Style
HVFD-T (HT)
The
Horizontal/Vertical Flanged & Drilled-Fluoropolymer (PTFE)
Lined check valve is a one-piece cast body valve with ANSI/ASME B16.5 Class 150 flanged ends.
It has a solid one-piece PTFE liner that extends over the raised face portion of the flange face to
serve as the gasket. All wetted
parts are fluoropolymer (PTFE/FEP/PFA) including the FEP encapsulated Stainless Steel spring. View
More
|
|
|
